I bought a sr20det 1800$ can!
I check the cams, the head is fucked up!, lobe are fucked up, blue color and dirty not nice!

The guy from motor import japan in montreal said I have to run it, because it should works but i am sure it will sucks!if I want another motor, i'll wait 1 or 2 months!

I ordered a jwt ecu with the bluebird program.

So, i want to fit the t-25 bb set-up on my stock sr20de.

questions:

is the bb injectors will fit my sr20de?

is the reprogammed ecu(bb set-up 8.3of compression) will work ok with my 9.5
compression ration?

is there any problems at the horizon?

Yes the injectors will fit, but you don't want to use an ECU for low-compression pistons on a regular engine. You'd be better off just getting a new high-port head (unless you already have a high-port head) and putting it on the Bluebird block. Then you'd have no trouble. If you plan on putting the Bluebird parts on your engine, though, you'll have to send the ECU to JWT for reprogramming ($100US), becuase of the differences in the ignition and perhaps fuel curves.

I dunno, if the head is fugged up on that motor, I'd hate to see what the bottom end looked like.

Send the motor back, and get your money back or get another motor that's CLEANER from him.

I'm sorry to hear that (nx2k for www.npclub.com), but you better ask for another engine. Because when all is installed and ready to run, you will want to feel safe with your setup. If you know there's something wrong, you'll feel bad about it.

I went to Julien Performance last Friday and they told me about you, I didn't know that they were installing you engine!

Salut!