|
: B13 tranny on a B14 Help please gsus 08-14-2007, 01:45 PM Hi guys i just broke my b14 transmission and I have a b13 on hand. does this tranny fits directly on my b14 without any mods? any change on the inner cv joints or shafts...... IŽll aprecciate any help 2dr_sentra 08-14-2007, 01:53 PM swap the speedo sensors. goneturbo 08-14-2007, 04:37 PM You may also get the crank position sensor code. It is a little sensor that would be mounted on the front of the B14 tranny. Maybe you could swap the cases if you needed to... Otherwise you may just get a CEL. silver200 08-14-2007, 05:30 PM You can drill and tap a hole for the crank sensor if you really want to so the CEL doesn't come on, other than that it should bolt right up. gsus 08-15-2007, 02:23 PM Thank you all guys!! last night i removed the b13 tranny from a sentra. does anyone has a picture on the work for the crank position sensor? Also my ECU is going to be reprogramed by Calum, does anyone know if this feature could be eliminated? (Crank position sensor) | ||