I have a pretty clean NX center console for sale. This one does not have a lid - the lid isn't missing, it just doesn't have a lid (check the pics and you won't see any holes).

If you need a lid, it is still easy enough to add a lid from a G20, another NX, or even a Maxima (I believe that is what I used on mine in my car). The little hardware in the pic is included also.

I'm asking $60 shipped to the lower 48 states - if you are else where, I can get you a quote. PayPal preferred at j_foster *at* charter.net

Time for pics:

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_3.jpg

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_4.jpg

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_5.jpg

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_7.jpg

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_8.jpg

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_9.jpg

Thanks,

Josh

Seriously? They made on without a lid? What year was that?

Oddball value!

_SHig

Seriously? They made on without a lid? What year was that?

Oddball value!

_SHig

It surprised me as well. The car is a 93, and the dimensions are the same as my 92 - it must have been towards the end of the production cycle.

Josh

Are you sure that's not a B14 part?

C

Are you sure that's not a B14 part?

C

It was pulled from a 93 NX1600, and the little brackets match previous consoles that I've had. Next time I'll try and check out the manufacture sticker for a production date. The car was pretty much stock and female owned (I assume since there was glitter and ear rings in the floor). ;)

It seemed weird to me also. I guess I'll up the price for the *rare* USDM piece. :D

edit: the "pocket" can even come out. If you pull the little screws in the pics, the pocket comes right out. I think that would be handy if you mount a boost controller, etc in there.

Is there a part number molded into it?

C

Is there a part number molded into it?

C

I'll have to check when I get home. I was thinking the same thing.

The detail on that back end looks a little different as well. I recall something about ABS vs Non and a controller box or something under there. Wonder if that's the difference?

Bump! :^)

_SHig

The ABS ones have a bump out on the bottom.

C

The ABS ones have a bump out on the bottom.

C

You mean airbag. The ABS computer was in the kickpanel. The airbag module was under the console. That's not a B14 part either.

The airbag stuff was under there also - Chris threw me off w/ the ABS thing.

You guys are killing business on my little bastard console. :rofl: I guess I'll have to find a part number, look it up in FAST, and realize I have the last NX console ever made on the entire assembly line. :tongue:

check the production date too, you may be right :rofl:

D'oh, my bad on the ABS thing. Didn't ALL NXen have Airbags ***?

_SHig

OK, ask and you shall receive:

http://www.sr20forum.com/gallery/data/1107/medium/NX_Console_492.JPG

I checked my US FAST and even the Euro FAST, but I can't reference the exact part number listed.

Production date will have to wait since I don't have access, and I'll have to see when I can see that....curious myself.

Another weird thing is that when you look in FAST, you can see that goofy bump out in the rear - at least on my Euro FAST.

The plot thickens....... ;)

maybe mexican b13? considering how the rear is finished, looks more like a 4 door car's center console than anything else.

eric says no b14...what about b14 sentra not b14 200sx? my friends sentra has a console similar looking console

Manufacture date of 7-92 and the VIN number is JN1EB36CXPU200246 - I grabbed the seat rails from the car yesterday also. :)

I saw a B14 yesterday, and it looks similar except the B14 stops before the "boot" for the shifter. After looking in the NX registry, it appears the car is now where near the last of the production.

Either it was added on after the fact or is a bastard piece. Not sure. Still a clean console for sale though. :rofl:

Josh