Engine Rebuild Parts... [Archive] - SR20 Forum

: Engine Rebuild Parts...


Crim
08-23-2007, 05:16 PM
Can I get a price quote on the following, its for a 92 NX2000, SR20DE that I'm doing a rebuild on. If you see anything you think I'll need feel free to add it to the price quote.

Engine Seal/Gasket Kit (What all is included in this?)
PCV Valve
OEM HeadStuds
Front & Rear Main Seals (If not included in Engine Gasket Kit)
Valve Stem Seals (If not included in Engine Gasket Kit)
Valve Cover Gaskets (If not included in the Engine Gasket Kit)
A set of main bearings (I need to get the grades from the block crank still)
A set of rod bearings (again I need to look at the grades)
Thrust Washers
Throttle Cable
Steering Rack Boots (Both Sides)
ABS->NonABS brake conversion parts
46242 4624265Y00 TUBE ASSY-BRAKE,FRONT LH
46252MA 4628364Y00 TUBE ASSY-BRAKE,REAR MSTR CYL
46250+A 4628264Y00 TUBE ASSY-BRAKE,FRONT MSTR CYL
46240 4624064Y01 TUBE ASSY-BRAKE,FRONT RH

Also do you carry Brian Crower Cams/retainers/springs?
What about an ES Master bushing kit?

Thanks!

Crim
08-25-2007, 10:07 AM
bump?

Crim
08-26-2007, 06:28 PM
Hoping to get an order delivered before the long weekend, thanks.

Crim
08-29-2007, 10:31 PM
weak, will purchase from another vendor.

GregV
08-30-2007, 12:45 PM
Wow. I'm truly sorry I missed this, especially for a first time customer. Sometimes i don't get a chance to hit the forum for a couple of days, but this time was longer than usual. You're always welcome to call or email me direct if you decide to give me another chance in the future.

Once again, sorry to let you down.

Crim
08-30-2007, 07:37 PM
I purchased the bottom end parts thru my other guy, maybe we can compare prices on the remaining parts I'll need to order.

What can you get the following to me for? as stated above its a 93 NX2000. It may be awhile before I can place this order depending on what other expenses come up after the first.

Throttle Cable
Steering Rack Boots (Both Sides)
Nismo FPR
Cap + Rotor
PCV Valve
ABS->NonABS brake conversion parts
46242 4624265Y00 TUBE ASSY-BRAKE,FRONT LH
46252MA 4628364Y00 TUBE ASSY-BRAKE,REAR MSTR CYL
46250+A 4628264Y00 TUBE ASSY-BRAKE,FRONT MSTR CYL
46240 4624064Y01 TUBE ASSY-BRAKE,FRONT RH

GregV
08-31-2007, 11:20 AM
I purchased the bottom end parts thru my other guy, maybe we can compare prices on the remaining parts I'll need to order.

What can you get the following to me for? as stated above its a 93 NX2000. It may be awhile before I can place this order depending on what other expenses come up after the first.

Throttle Cable $42
Steering Rack Boots (Both Sides) $17.26 each
Nismo FPR $111
Cap + Rotor $11.80 + $6.54
PCV Valve $7.78
ABS->NonABS brake conversion parts
46242 4624265Y00 TUBE ASSY-BRAKE,FRONT LH not needed, same w/ and w/o ABS
46252MA 4628364Y00 TUBE ASSY-BRAKE,REAR MSTR CYL $6.45
46250+A 4628264Y00 TUBE ASSY-BRAKE,FRONT MSTR CYL $9.75
46240 4624064Y01 TUBE ASSY-BRAKE,FRONT RH $12.50

see above

Crim
10-11-2007, 12:02 PM
Hey GregV I'm ready to make the above order, I'd like to get everything except for the Nismo FPR. I calculated the total to be $131.34 + Shipping.

Please advise with what my next steps are to get this shipment to my door :D

EDIT-- Actaully I'd like to add on ES Steering Rack Bushings if you sell them along with NX2000 front caliper rebuild kit for both front calipers. Thanks!

GregV
10-11-2007, 12:54 PM
CALL ME WITH your info ASAP

GregV
10-11-2007, 12:57 PM
$167.34 now + shipping

Crim
10-16-2007, 12:26 PM
Hey Greg,

I realized that my JDM SR20DE has the thicker sodium filled exhaust valves. As a result I need a set of a valve stem seals for the exhaust side only for the 7mm valves. (Those are the thicker ones correct?)

How much does a set run?

Thanks!
Stephen

GregV
10-16-2007, 07:45 PM
had to order 1. coming in with your other stuff

Crim
10-16-2007, 09:05 PM
thanks