hey greg
Just as an FYI the rubber bushings that snuggly fit the VE injectors into the IM are the same as the '99 SE-L ones.

Charles and I discovered this this past weekend when my rear fuel rail was causing my IM to run lean

The 2 rings around the injectors are the same for like everything. The insulators under the rail are the same as 95 200sx 2.0. Both the upper and lower rail take the same part#s on the n1 manifold.

you could'a told me that when i ordered the wrong ones from you silly ;)

Let this be a warning to you "look up my own part #s" guys! ;)

so Greg i had purchased insulators for a early 90's SR20DE motor.
Now that i have the whole VE set up, what is the part number for the VE type insulator's? the old DE one's are about 2mm to wide!

Thanks,

Actually the SR20VE injector insulators are the same part number as the US GA16DE 11/94 - 06/95 part # 16636-41B00

Here are some scrren shots this is for a P11 SR20VE:
http://i167.photobucket.com/albums/u159/zilvia_album/SP32-20070830-123321.gif

http://i167.photobucket.com/albums/u159/zilvia_album/SP32-20070830-123325.gif

http://i167.photobucket.com/albums/u159/zilvia_album/SP32-20070830-123428.gif

What he said! ;)

see, i helped someone out