anyone used these? please help. I want my wheels to even up vertically to my fenderwell without rubbing. In short, I want my wheels to come out as much as I can without rubbing.


Bryan

I didn't think H&R had a application for the sentra/200sx. There is a site that will do custom ones. Of course I can't remember the site now, but will do some digging.

H&R makes 5mm and 10mm spacers with 4X100 bolt pattern and 59mm centerbore. I have a set. :)

Aside from racing purposes why would you want to do this?
Looks? It may not be the best idea unless you do some serious driving with them.

o

Looks yes. Hey slow se-r you got pics for the back wheels. I just want to see what the 10mm ones look like?


Bryan

http://www.optauto.com/store/images/HR-W-SPCR.GIF

I was wrong -- H&R spacers only come in 5, 15 and 20 milimeter.

no man, I mean pics of it on the car. I want to see how it looks.


Bryan

Originally posted by Dswtflip4u
no man, I mean pics of it on the car. I want to see how it looks.

"Looks" are going to vary depending on the offset of the wheel.

Pat,

Did you have to use longer wheel studs? I'm looking to get some wheel spacers for my NX, since the tires on my track wheels slightly rub against the strut housing in the rear (15x6.5", 40mm offset, 205/50-15 Kumho Victoracers).

to my understanding, h&r comes with longer wheel studs.


Bryan

Originally posted by RollcageSR20
Pat,

Did you have to use longer wheel studs?

I have the longer wheel studs that came with the H&R spacers but never installed them. I have 5mm spacers -- ran cheap Pep Boys universal 7mm spacers before -- and haven't had any problems. Plus I wasn't sure if my closed-end lug nuts would fit with the longer studs.

Originally posted by slowSER


I have the longer wheel studs that came with the H&R spacers but never installed them. I have 5mm spacers -- ran cheap Pep Boys universal 7mm spacers before -- and haven't had any problems. Plus I wasn't sure if my closed-end lug nuts would fit with the longer studs.

Thanks for the help, Pat. One more question. Could you tell me where you purchased the H&R spacers? I looked it up, but the only place I was able to find that carries H&R spacers for Nissans is on back order (Options Auto Salon). Let me know... Thanks!