I didn't really want to sell this on the forum, as it's potentially going to cost some money to ship.

So here's what I'm going to do. I'm going to sell it, and ask for the buyer to pay for half of the shipping costs.

What's for sale?

A Megan Racing two piece header (Ceramic Coated), which includes the primaries, and the downpipe. They are of a 4-2-1 design. The downpipe has had an o2 sensor welded into the merger (Not sure if it's the actual merger, but it sounds good calling it that). The bung was welded so that I could use my wideband.

The exhaust is NOT a 2.5" VRS catback exhaust w/ magnaflow muffler. The sound is VERY nice, a little on the loud side, and not really raspy. I repeat it is NOT a true VRS exhaust. It has components of a VRS system. I haven't taken measurements, but the resonator looks to be about 22 inches, maybe longer.

The bad: The car had to be towed a few months back, due to the clutch cable snapping on me. I didn't have a spare in the car, and it was hot as balls, so I just paid to have someone tow it back to the house. This being said, the muffler tip has a slight bend on the bottom, where it tapped the pavement during the tow. I'm sure it can be pulled back out, but it's not overly noticeable.

I will take pictures and post them once I pull it off of the car today.

The cost: $250+ 1/2 shipping costs, takes the whole shebang. Really not wanting to part this out guys. I've got the turbo-back 3" exhaust going on today, so this REALLY isn't needed..

How much for just the exhaust?, no header

Really not wanting to part this out guys.

How much for just the exhaust?, no header

... :)

Is the header and exhaust for a B13?

UPDATE:

Sorry all, but after pulling the exhaust yesterday, it doesn't resemble anything of a VRS 2.5" exhaust. My sincerest apologies. I will remove it from the original post I started.

It is, a 2.5" exhaust, with a magnaflow muffler and a REALLY BIG resonator, but it doesn't have the quality of VRS, IMO.

And Scott, it's B14 exhaust. The header doesn't matter. The downpipe might, though.

Taking this back up.

Asking $200 + 50% shipping costs to lower 48 states.

Again, custom 2.5" catback exhaust with magnaflow oval muffler, and Megan Racing 2 piece header with o2 bung welded in for wideband.

I'll post pics tonight.

Pics?

Sorry, didn't get around to posting pics last night. Made a note to self, pics will be up tonight.

The biggest problem I think I'm going to have is shipping the rear section, as it's one piece, then flanged to the Muffler. It's going to be interesting though :rofl:

So does the exhaust bolt up to a stock cat or is it like welded to the downpipe on the Megan racing header?

Also, shipping wont be a problem with me cause I can just pick it up or maybe meet you halfway from Albuquerque or something.

Any rough idea of the cost to ship it to 61821? Thanks, Dan.

Is it mandrel bentor crushbend?

Any pics?

its mandrel around the axle and gas tank it sounds good too. i was a good friend to 98b14 who sold the car to tekkie.

Sweet! I cant wait to put it on my car. ;)

its mandrel around the axle and gas tank it sounds good too. i was a good friend to 98b14 who sold the car to tekkie.

So, was this cat-back bolted up to the factory cat on that 98 B14?

Yeah, it bolts right up to the factory cat, which is still on my car with the 3" turbo back.

Nissanboi is right. It sounds REALLY good on the car, and it's mandrel bent from the cat back.

Guess I should mention:

CAT BACK EXHAUST SOLD. Megan Racing 2 piece header still up for grabs! Someone has to want them! (Guess I've been slacking on the pics, I'll shoot them in a minute before I go to blockbuster Video.

Awesome! Then it will bolt right up to the factory cat on my 98 SE. It's like it was meant to be. :D