Hey, I'm currently swapping in a E5 blacktop S13 SR and I was wondering what transmission sensors I had too take off my dual-cam KA trans to put in the SR transmission in order for the KA lower harness to work? I believe it was the reverse light sensor and the speed sensor... those are both located towards the rear of the transmission correct? What about the third sensor on the SR trans, the one close to the engine in the bell housing area... What is that one and do I need to swap it with the one from the KA?

Let me know
Thanks guys,
-Trevor

There are physically less sensors on the SR, or at least using an S14 lower harness there are. It's been forever since I had to deal with this.

The trans sensors are on my list of crap to do.

^^^ Yeah I know, there is 3 sensors on the SR trans and 4 on my KA trans, but you do use the KA lower harness in the swap but the sensors on the SR trans have different plugs and pinouts so I was wondering what ones I need to take from the KA to put on the SR transmission for the harness to work.