Racing an SE-R that isn't mine this weekend .... quick question -- on the Unorthodox Racing pulley set, what does each timing mark correspond to on the crank pulley? There are six (I think) individual marks. It's a '92 SE-R, FWIW.


________

Pat
'00 Lightning, hauls S ... E-R's
'91 SE-R, SCCA/NASA racecar, dented
'92 SE-R, SCCA/NASA racecar, mine this weekend ;)
Blackshirt Racing (http://www.blackshirtracing.com)

This was copied from the instructions that came with the pullies

CRANK PULLEY TIMING MARKS: from 11/90 to 4/91 the first mark is 0 degrees (TDC). For 5/91 and later the first mark is 5 degrees BTDC then 0 degrees then +5,10,15,20 advance.

Mike

from left to right: -5,0,5,10,15,20

11/90 as in November 1990? That can't be right....

I'm thinking Mike is talking about the timing marks on the stock pulley. The ones I posted are for the UR pulley.

I have been led to believe that the first batch of pullies from UR had only a TDC mark. I believe I read that on se-r.net somewhere. Subsequent pullies had all the timing marks I listed earlier.

Originally posted by Storm88000
11/90 as in November 1990? That can't be right....


This is the production date, not the year of the car. If you go here http://www.unorthodoxracing.com/instructions.html and click on 200SX/NX2000/Sentra SE-R you will see the instructions.

Mike

If you just figure the last mark on the right is 20*, you should be ok regardless of which UR version you have.