I am gonna buy this turbo from Dswtflip4u from what it looks like, we should be finalizing the deal early today, so can anyone give me some thoughts, specs, power capabilities, anything?
Thanks,
JCC

T04B compressors suck, basically. they are an older, inefficient design compared to a t04E. I personally would skip it, but if you are hellbent on saving money... That turbo is sized and spec'd for a inline-6 Z-car motor (IIRC) and won't be optimal for an SR20.

IMHO, of course
Andris

thanks for your opinion, I was just wondering though, thinking the T04B compressors aint that bad, *** Rob Cadle reccomends that housing as an upgrade to the Gti-R T28, I just would like some concrete info on it, but thanks for your opinion, nothing is finalized yet as I have not heard back from the guy,
JCC

I am running the mentioned compressor on my sr20. I don't know the specs for the JWT 350 Turbo. If was going to do it all over again I would have gone with a T04e compressor.

I have the Super V series T04B compressor matched a T3 Stage 3 turbine. The super V has a 3 inlet like an E series compressor.

On my setup I can tell that boost comes on at 2900 rpms and full boost hits ~ 5600. I am boosting 13 psi. Overall I am happy with it though.

this are the specs: T3 turbine housing with T31 wheel and .63 A/R ratio housing T04B compressor housing with .60 A/R ratio housing. Rob? anyone?
JCC

You'll be better off with a T-04E compressor stage.

I am saving up to get one from Louis, what ever happened to the Disco Potato turbo?
JCC

D/P turbo will be available hopefully by the end of the year.