does any one know what items will i need to change my front brakes on my b14 and also the rear to disc. i have the 1.6 brake system. so please help

does any one know what items will i need to change my front brakes on my b14 and also the rear to disc. i have the 1.6 brake system. so please help
I am no mechanical genius, but I am betting that what you are trying to do to a B14 will be very similar to this:

http://www.sr20forum.com/technical-information-library/81415-how-upgrade-your-brakes-b13-nx2000.html

That is going from a B13 Classic to NX2K brakes, but I would *imagine* the procedures, steps, parts and materials would be damn near identical.

Someone smart please correct me if I am wrong. :D

go to advance auto parts and ask them for loaded front calipers for a 93 nx2000 with the part number "17-1441" and "17-1440" then order the correct rotors and you have everything for the front brakes.

They have the fronts covered...


For the rears you have two options. Fastbrakes.com sells a rear conversion bracket kit. They supply the brake lines, brackets and rotors, you supply the calipers and pads.

Or you can find a wrecked SE-R and swap out the entire rear beam axle.

Do a search on this topic as it has been thoroughly covered, both the NX brakes and the rear conversion.

id go with fastbrakes.com.

there good and the kit is cheap.just get pad,caliper and parking brake cables and ** good.

go to advance auto parts and ask them for loaded front calipers for a 93 nx2000 with the part number "17-1441" and "17-1440" then order the correct rotors and you have everything for the front brakes.

Would this be the same process for a 91 se-r without abs?
Just want to make sure before I go out and buy this stuff.

To make sure you get the correct nx front calipers, you need to ask for the following exactly:

91 NX2000 w/ ABS, obviously the 2.0 engine, made in Japan.

That has always been the foolproof way to make sure you're getting the AD22VF calipers and rotors.

The easiest way to do this is visit gspec.com, then give Greg Vogel a call and order exactly what you want for the front and back.

Can you do this if you don't have abs?

Can you do this if you don't have abs?

Yep. The procedure is the same for a B13 without ABS. Those caliper will work regardless of whether you have ABS or not. It's just how we identify them so the guy at the counter will give you the right part.

there should be no questions............................go to advance auto parts and buy the exact part numbers i listed. those are the AD22VF calipers and can be used on

b13
-sentra w/o ABS
-sentra w/ ABS
^1.6 and 2.0 models 2 or 4 door.
-nx2000 w/o ABS
-nx2000 w/ ABS
-nx1600 w/oABS
-nx1600 w/ ABS

B14
-sentra w/o ABS
-sentra w/ ABS
^1.6 or 2.0 models.
-200sx w/o ABS
-200sx w/ ABS
^1.6 and 2.0 models


PLEASE KEEP IN MIND IF YOU HAVE THESE CALIPERS YOU MUST USE THE CORRECTLY SIZED ROTORS OR YOUR PADS WILL FALL OUT AFTER A GIVEN AMOUNT OF WEAR AND I WILL NOT TAKE BLAME FOR INJUREY IF THAT HAPPENS. USE THE NX2000 ABS ROTORS THEY ARE 1 INCH WIDE
http://www.nissanperformancemag.com/august01/images/brake19.jpg
ad18 rotors on left, ad22vf rotors on right. photo from npm.com
http://www.nissanperformancemag.com/august01/brake.shtml

go to advance auto parts and ask them for loaded front calipers for a 93 nx2000 with the part number "17-1441" and "17-1440" then order the correct rotors and you have everything for the front brakes.

i take it that those part numbers are for the left and the right

Dont mess with trying to get the right parts and all that, just buy my complete kit in the classifieds.

/shameless plug

Dont mess with trying to get the right parts and all that, just buy my complete kit in the classifieds.

/shameless plug
you still have a complete kit 4-sale...i've a 96 200sx se-r(b14 i think)...wanted to upgrade front & back...starting with brakes...suspension...tires...than engine in that order

The brakes are sold, sorry.