ok i will show u the tools needed as well as the best i can photo step by set possible. i did not opt to take off the steering wheel or the seats which could help with the install, i did take them out of the car at the junk yard because i got this out of a b13 SE model for $35 and i got a perfect condition Air Bag Leather wrap Steering wheel for $6 which ill do a writeup later on about the install of that.

ok first thing first heres my new pretty dash.

http://i12.photobucket.com/albums/a233/specalk99/P1000263.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000264.jpg
htt[IMG]http://i12.photobucket.com/albums/a233/specalk99/P1000266.jpg

heres my old p.o.s

[IMG]http://i12.photobucket.com/albums/a233/specalk99/P1000267.jpg

if you have a nx2000 it works out great, take the t-tops off it will make things more confortable, ive got both a nx2000 and a b13 se-r so ill have to do this soon again in the other car.

http://i12.photobucket.com/albums/a233/specalk99/P1000268.jpg

the only tools youll need right now a philips and a 10 mm and if you got a door clip removal tool then thats a bonius or u can use a flat head screw driver. i choose the two different for color differences so while im working and showing you pics u can tell the different tool i use :)

http://i12.photobucket.com/albums/a233/specalk99/P1000269.jpg

ok in the center console area where the shift boot is at youll need to take that off, u donot have to take the shift knob off i did not and ive got a short shifter, all u do is grab the backside part of it and gentley pull it will pop out and just pull it all the way up

http://i12.photobucket.com/albums/a233/specalk99/P1000272.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000271.jpg

ok next there is a coin tray youll need to grab the back of it and pull it out and set it outside of ur car top side up

http://i12.photobucket.com/albums/a233/specalk99/P1000274.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000275.jpg

ok you now need to take the ash tray out, what u do to take this off is pull it out as far as it will go then push down the metal area, then sit it outside the car

http://i12.photobucket.com/albums/a233/specalk99/P1000276.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000277.jpg

now youll need to take off the radio bezel, this is a little more tricky and ill guide u threw as best as i can.. theres two screws at the top above the radio

http://i12.photobucket.com/albums/a233/specalk99/P1000278.jpg

ok nows the time to make a bolt and screw holder, i just had a glass i used its ur call

http://i12.photobucket.com/albums/a233/specalk99/P1000279.jpg

heres the lower screws on the lower part of the radio bezel ( 2 total ) the other one is hidden below the lighter on the LT side

http://i12.photobucket.com/albums/a233/specalk99/P1000280.jpg

then it should pop off, dont force it but give it a little tug

http://i12.photobucket.com/albums/a233/specalk99/P1000281.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000282.jpg

theres 2 clips on mine but for the sentra se-r theres 3 due to the fog lamps. theres a little button you press and then u can pull it off and dont force it u can mess this up

http://i12.photobucket.com/albums/a233/specalk99/P1000283.jpg

ok heres the two u have to take off for the lighter, the black one just pulls off, the white one has one of them little clip buttons be carefull the white clip can brake easly

( before )

http://i12.photobucket.com/albums/a233/specalk99/P1000284.jpg

( after )

http://i12.photobucket.com/albums/a233/specalk99/P1000288.jpg
http://i12.photobucket.com/albums/a233/specalk99/P1000289.jpg

now for the ac vents at the top of the radio bezel, now on the RT and LT hand side theres little tabs that hold it in place but ill show u a pic of that as well.

http://i12.photobucket.com/albums/a233/specalk99/P1000285.jpg

heres the tabs after i took it apart ( again be careful they can brake easly and there on both sides)

http://i12.photobucket.com/albums/a233/specalk99/P1000286.jpg

ok pull out the ac vents, theres a cable for it on the bottom side, youll need to disconnect it and its just like the throttle cable so its super easy to do but i forgot to take a pic ( oooppps )

http://i12.photobucket.com/albums/a233/specalk99/P1000287.jpg

ok radio bezel off now time to take screws off, this is the ac controls and theres 4 of them total, 2 of the LT and 2 on the RT, now take them off but leave the AC controls in, they will not be taken out at all.

http://i12.photobucket.com/albums/a233/specalk99/P1000290.jpg

Another potentially awesome thread lost because of someone's short-sightedness...this thread is now totally and completely pointless.

What are you talking about this is a 4 year old thread and i no longer own a sr car so i had to free up space on my photo bucket account

Exactly. This is no longer a "how to", it's a "how you could have; well, assuming I'd bothered to leave the pics up".

I'll ask the mods to delete the thread.

Go for it. Its really simple to do the swap of a dash. I also did the nx1600 digtal cluster install how to and that is super easy as well. But i quit coming to this forum when it changed ownerships and after a while i sold my sr cars and all my sr stuff as im into restoreing old vespa scooters and working on nissan titan so the sr photos where deleted out of the photo bucket account