|
SentraB14 11-12-2007, 07:26 PM Okay, so this happened a while back but the time has come for me to bring this subject up as it is starting to get really cold. My heater doesnt work on 1,2,or 3. When I get to 4 it will work no problem with maximum blast. I would prefer to have it on 1 or 2. Any suggestions as to what the problem might be and the solution. Any help/advice is appreciated. chriscar 11-12-2007, 07:34 PM Search "fan resistor" C bobmoneyz 11-12-2007, 07:50 PM also could be called a blower resistor. seajayemm 11-17-2007, 01:06 PM It is the blower motor resistor, located under the dash on the passenger side. Its an easy fix, go to your local Nissan dealership and order it. I replaced mine because of the same symptom, only blows on high, and it fixed the problem. I believe it cost between 10-20 dollars. vdubya63 11-20-2007, 05:20 PM Yea mine does the same thing.. Gets to damn hot in there quick SentraB14 11-20-2007, 09:05 PM blower resistor is what it was...replace and now all good. thanks for the info! stealthtorque84 11-20-2007, 09:56 PM This must be a common thing i am a first time nissan buyer a friend that is on the forum here got me into the 200SX and i picked it up for two grand it runs good but that god damn heater only works on 4 also! lol LightNeo 11-21-2007, 12:01 AM Blower motor resistor...first part i bought right after i got the car... the cause was it got wet somehow so it shorted | ||