If I bought the SR20DEV FMIC for my stock BB t25, how much modification would it take to make it work with a T28 later? can u buy an F-Max I/C kit by itself, and will it work with something other than a t3/t04 without major mods? and don't forget the hotshot DET install kit. will it work with a T28 also?








:cool:

Why not just get the Forge IC and make you own piping?

no one in my area can do mandrel bends,

and another thing... earlier i said that my VAC only at like 9 or 10 hg. i still haven't resolved this. the people that did my I/C job removed the little black breather box in front of the valve cover. they just put a tube in it's place. could this cause anything? should i buy a catch can or something?

Originally posted by ITR_KILLR
no one in my area can do mandrel bends,

Buy some bends from JC whitney or teh equivalent then cut and weld or connect with couplers

Originally posted by blairellis


Buy some bends from JC whitney or teh equivalent then cut and weld or connect with couplers
exactly no one does mandrel bends so just buy some mandrel bends and have them weld it for you.
Sean

i have a conquest I/C, if anyone else has this I/C front mounted i would like to know what pieces of piping you bought i.e.( 2 90degree, 4 45degree, etc) i dont like how the piping is run on it now.

a few pics would be nice also!:)

No modifications necessary. The worst you'd have to do would be to rotate the compressor discharge on the T28 to match your T25's angle. No biggie.

thanx Dren, so your saying i could use the same sr20dev fmic for my t25 and the disco potato if i get one

To be crystal clear, yes, the pipes all fit each turbo just fine.

woooohooooo!!!!:D