|
MEclassic 07-14-2002, 09:46 AM Anyone ever used anything other than the nissan gasket where the EGR tube attaches to the intake manifold? I would rather not wait a week to get this dinky little gasket from nissan. That and a MAF connector are all I need to finally get my white car back together after almost 8 months down. (Yes, Ben, I finally have that head installed). Anyone want a 130k highport head with 8 bent intake valves :)? Josh Geo 07-14-2002, 10:51 AM I've used RTV copper before. SERprise In WV 07-14-2002, 11:54 AM What George said, sorta'. I merely cut my own out of AutoZone cheap gasket paper (fiber-based). Pop it on there, and maybe use a little RTV to seal her up. MEclassic 07-14-2002, 12:09 PM I'm one step ahead of you guys. Just so happens, I went over to Autozone and bought some of their gasket material right after I posted, and I already have the copper RTV in my toolbox :). If only I had a good MAF connector, I could get this thing finished today :mad:. Josh Nick 07-14-2002, 05:03 PM i just used silicone and its held fine for 6 months so far ALLMOTORSENTRA 07-15-2002, 09:04 PM str8t silicone sealer is fine | ||