We have a 4x100 bolt pattern, with +40mm offset correct and 59mm center bore (What is the center bore)??? Anyways, my tires have gone to crap, so I need to find some real cheap steel wheelies + tires so I can actually drive over to an alignment place and also get new tires...... (I don't feel like driving on belts!) . My question is what cars can I get wheels off of, will all 4x100 mm wheels work (offset shouldnt be too big of an issue right since its for real temporary use). It should be safe to use wheels from civics and integras and other 1.6l sentra/200sx's, etc.? I was curious whether the rear disc brake will cause any fitment issues??? Will a 13" steel wheel go over that, or will I need a minimum of 14" or what?

Thanks
Anthony

If it is for short term use anything with the same bolt pattern will work. All you need to remember is USE THE SAME WHEELS ON THE FRONT LEFT AND RIGHT. If you have two different sizes on the front it will f#$k up your diff.

no worries..... i'm slappin these bad boys on the rear
thanks