Setup [Archive] - SR20 Forum

: Setup


akes200ser
07-22-2002, 01:15 AM
ok i have a question i know that a wet system is much safer and i can't afford a direct port system but how do u get the extra fuel i mean i know taht there is a y plugger that has connections for no2 and fuel but if u tap into the fuel line arent u taken away from the fuel from the engine and can i run a 50 wet shot on a bone stock engine internally all i have is a free flow exhaust and a hotshot cai and a gen 3 hotshot header what do yall think

NiceGuy
07-22-2002, 02:59 AM
You could run a dry 50 shot on a bone stock engine.

BUT, I would recommend a 65 shot wet.

You tap into the fuel return line, that's where you get the fuel from.

Just save up for direct port, it's worth it. Then you would need a Walbro 255 lph in tank.

SERprise In WV
07-22-2002, 10:14 AM
The stock pump will handle a direct port setup, up to about 78hp setting. Mine did for over a year and a bunch of dragstrip passes.

I wouldn't go past that without the Walbro, though. Cheap insurance. :)

SE-Rican
07-22-2002, 05:25 PM
I ran a single fogger wet set up for a while. Tapping into the return line will not cause problems. Like GP said becareful on leaning out. I ran a 50 shot with no problems. When I upped to a 75 that is where the leaning started. So becareful. Pretty much you will max out the fuel pump after a 75 or 78 shot

NiceGuy
07-22-2002, 10:36 PM
Ya, I'm sorry, you can run 75 shot direct port on stock fuel pump. I was assuming you would go 100 shot.......