I just sent an email to wheel adapters.
I have a few guys interesed in purchacing some hubcentric from 4X100 to 4X114.3 adapters. Our cars come 4X100. With a 59.1 center bore. If possible we can set up a group deal right away. Thanks.

Please follow thru guys and do the same? This could save us a lot and have some great wheels in the process. What are the Spec V centerbores.

:eek::eek::eek::eek::eek::eek::eek::eek::eek::eek: :eek::eek:
Son of a bitch, as I shot off the email, this guy calls me back within 30 seconds. UNBELIEVABLE!!!!!!!!!!:eek::eek::eek::eek::eek::ee k::eek:
He says $65.00 a piece. I guess that means we guys can use any Newer 4X114.3 wheel Nissan makes in the future on our B13's. I for one am down. Only thing is we have to use our own longer studs...I already have Nismo studs to....



NICE CHAT THANKS FRED GOESKE



PLEASE REPLY TO THIS SAME EMAIL TO HELP KEEP MY RECORDS IN ORDER.
THANK YOU

MOST 1" TO 1.5" THICK CUSTOM MADE ADAPTERS OR SPACERS START AT $65
EACH. LARGE TRUCKS ARE MORE.

1/4" TO 3/4" THICK HUB CENTRIC FLAT SPACERS $40 EACH.

THANKS FRED GOESKE

Fred Goeske
Design Deluxe
21300 Deering court
Canoga Park, CA 91304
Voice (818)992.5700
Fax (818)992.0325
www.wheeladapter.com

-----Original Message-----
From: ianshannon97@msn.com [mailto:ianshannon97@msn.com]
Sent: Wednesday, January 16, 2008 8:22 AM
To: Fred Goeske
Subject: WheelAdapter.com Request Form

WheelAdapter.com Request Form

Phone = (718) XXX-XXXX

Work Phone = () -

Cell Phone = (917) XXX-XXXX

Email = ianshannon97@msn.com

First Name = Ian
Last Name =XXXX
Address1 =
Address2 = XXXXXXX
City = Brooklyn
State = NY
ZIP = 11207

Subject = Wheel Adapters
Comments = I have a few guys interesed in purchacing some hubcentric
from 4X100 to 4X114.3 adapters. Our cars come 4X100. With a 59.1 center
bore. If possible we can set up a group deal right away. Thanks. 15mm
offset tops?




Guys, I know there are tons of wheel options out there, but take offs can be had for little to almost free by owners looking to upgrade from factory wheels. That can be an advantage to us as the longer we keep our cars, if Nissan makes 4X114.3 wheels we can continue to upgrade. Like Maxima guys do.
Can we make this happen? And with a 15mm spacer, they can stand out like these wheels do on this NX, but hubcentric..

http://i102.photobucket.com/albums/m109/charleekeo/Picture057.jpg
http://i102.photobucket.com/albums/m109/charleekeo/Picture058.jpg
http://i102.photobucket.com/albums/m109/charleekeo/Picture054.jpg

G H E T T O

Custom is Ghetto? My H&R spacers are Ghetto as well?? Not an option?

I heard these ruin your wheel bearings over time. Anyone have any information about this or is it a myth? I'm not interested, but i just want to shed some light....

It woudl be a very long time! I wouldn't RACE with these adapter, but daily driving would be fine!

Brent

http://www.wheelsandcaps.com/ebay/images/wheels/nissan/specv_side.jpg
Can you imagine these on a B13 or B14?
BTW, the comapny that makes the pictured wheel (Wheels and Caps) makes OEM style/replica wheels, but cannot make a direct 4X100. I tried.

It woudl be a very long time! I wouldn't RACE with these adapter, but daily driving would be fine!

Brent

I got that link from BMWand Volvo guys who use them. I know guys with older 6 series BMW's who have no choice but to use them.

I need spacers, this might be a great alternative.
Keep me informed.
Ed

hmmm, might be interested if this goes through. some spec v wheels would look nice on my b14.

I could be interested. They would allow me to run my volks I have in the garage :)

This would open up the P11 8 or 16 spokers as well as the 02 sport wheels. ;)

Thats pretty awesome!

Now if they would have the G20 to 4x100 then that would be pretty cool. I don't even have a G20 yet but it would be something I would want when if I do get one :)

As soon as I get a set I will report back.

I'd be down for a set

Looking forward to the update. I know where a nice set of Spec V 6 spokers are. Already painted too. ;)

any updates

I just sent an email to wheel adapters.


Please follow thru guys and do the same? This could save us a lot and have some great wheels in the process. What are the Spec V centerbores.

Ian, the Spec V center bore are the same as the 240's and G20's, 66.1 mm. I spoke to the same guy as you did awhile back and was told the same. The minimum adapter would need to be 1"(25mm). Most of the 4x114.3 Nissan OEM wheels are 45mm ET, using the adapters will give you a 20mm offset stance.

I heard these ruin your wheel bearings over time. Anyone have any information about this or is it a myth? I'm not interested, but i just want to shed some light....

This is true, a few Honda and VW owners I know who switched over to different lug patterns using adapters encounter this problem over time. So if any of you are looking to do this, proceed with caution.

i would of got these if i didn't sell my 16 g20 sport rims and my father put these on my moms volvo and there has been no problems

any updates

As soon as I get a set I will let you guys know.

any pics available for this spacer:rolleyes: