So does any one make bushings for the rear beam in a B14? ES website says it is part# 7.3120, but G Spec says part# 73119. If you look up 73119 it says they are for a 95-98 240sx.

Searching the forum yielded little to no results. It said ES was going to make them. When i search for the 73119's no one sells them and its like they do not exist.

So does anyone know who makes them and if the ES ones to exist? Or am i better off just getting stock ones and moving on.

I want to refresh the rear suspension and this is one of my concerns.

I couldn't find them when I had to rebuild my rear end. I put an entire new beam on (fresh stock bushings) and it's fine.

Octotat, a vendor sells these and some other bushings as well, including the front busings that add about a degree of caster. I had these rear beam bushings in my B14, and decided to take them out, because I'm going to get the rear beam bent to zero toe later this year. Super stiff poly bushings in the rear + zero toe would probably be too much for me.

If you can't reach him, give me a PM, I still have mine sitting in my room.