Does anyone know how much the JWT C-series of cams run? How is the idle?

I have JWT C3's ... they are very streetable for me but a lot of my friends don't like the idle. If you don't have the same mods as me, i think you will have a lot less low end torque, making it less streetable at low rpms. My motor is 11.5:1 compression & 1mm overbore I am not sure if the rest of my mods my make a difference on idle.
mods...
PR Cold Air Intake
2.5" Custom Exhaust
Hotshot Header/Test Pipe
JWT C3 Cams
Ferrea Racing Valve Train
JWT/Arias 10.5:1 300zx N/A Forged Pistons (1mm overbore, bumps compression ratio to 11.0:1)
DPR Stage 5 Cylindar Head(bumps compression +.5)
Ported Intake Manifold
ACT Street/Strip w/ HD PP
...hoped that helps your question at all.:)

Does this mean that now I have to look out for you on the road. NA vs. Turbo :D

Can I ask what you put out at the rear wheels, Serious Sleeper?

Originally posted by Sunder
Can I ask what you put out at the rear wheels, Serious Sleeper?
:D Trick Question?

I put out a cool 0hp @ the rear wheels but hopefully near 200hp & 150-160 ft/lbs @ the front wheels. Haven't dyno'd yet but i am pretty sure this will be near the hp & tq after trying to optomistically add everything up at the crank and deducting hp & tq from drivetrain loss.:)


oh yeah i do put down 85 ft/lbs of torque to the rear lug nuts though...hehe:D

I have the C2 cams and they idle fine. Cost new is aprox 1700 bucks with the ecu.

Serious what have you ran at the Track with this Setup?

Never ran at the track with the new mods. The motor is still in break-in. But when i ran at Orlando Speed World with the old mods, i was running 14.5 @ 91mph on 205/45/15 NT555R's

PR Cold Air
Hotshot Header
2.5" Custom Muffler Shop Exhaust (header Back 1 piece ex.)
ACT Clutch Stock Disk/HD Pres. Plate
ES Motor Mount Inserts
Advanced Timing


The Exhaust is for sale if any one wants to buy it... 2.5" Apex N1 style piping. It doesn't lose any lowend torque either (believe it or not). It conects to the header or stock exhaust manifold and goes underneith the back suspension and up at an angle with a canister muffler(5 Zigen Fireball Style). It sounds the best on the sr20 if you like powerfull sounding exhausts. Everyone at the "Street Races" always asks about it because it sounds so good. Email me for pics.
SERiousSleeper@aol.com:cool:

I'm just waiting for all the people to jump in here and tell us who have actually OWNED C3 cams that these cam's arne't streetable and shit. DUMBASSES.