|
LoRidinNx2000 07-29-2002, 08:16 PM hey guys i need a little help i *** bought a turbo kit for my sr20de and im not quite sure which are the oil lines and coolant lines theres two that are right behind the turbo and one that runs around the back of the motor is this an oil line in??? any help would be great..... thanks Ben 07-29-2002, 11:52 PM What "turbo kit" is this? Assuming it's a Bluebird or Avenir T25 kit or a GTi-R T28 kit, then, with the turbine inlet that bolts to the turbo manifold facing up, (that's the rusty lookin side :)) the oil feed is the top hole, oil drain is the bottom hole, and the coolant feed and outlet are the side ones. I don't recall which of the coolant holes is an inlet or outlet, but if you are going to customize the lines and not use the stock Bluebird or Avenir or GTi-R lines, then it doesn't matter with the coolant lines. Either one can be used for an inlet or outlet. LoRidinNx2000 08-01-2002, 01:06 PM im not really sure if its a t25 or t28 is there any way to tell i bought it off sumone else all i know is its a garrett is there a certain number i gotta find on it that tells them apart??? charlie2020 08-01-2002, 02:44 PM LoRidinNx2000 on the center housing there should be a little dog tag and on it should have 3 sets of number give me the number that starts with 14411-_____ and I can help you out. LoRidinNx2000 08-02-2002, 01:53 PM it says 1EOOO charlie2020 08-02-2002, 04:07 PM LoRidinNx2000 14411-1E000 is the W11 Avenir SR20DET turbine which is 1998 and above turbo and also supposed to be ball bearing. My turbine pt# is 14411-1E001 and I have a W10 Avenir SR20DET 1996-1998 this is also the U13 Bluebird pt# as well. LoRidinNx2000 08-02-2002, 05:36 PM does that make it a t25 or t28?? when i bought it he said it was a t25 charlie2020 08-02-2002, 05:49 PM Its a T-25 | ||