ITR_KILLR
07-29-2002, 08:28 PM
where do you draw the line between 50LB inj @ 4bar and 72lb inj @3???? what the pros and cons of either?
|
ITR_KILLR 07-29-2002, 10:22 PM when using a larger turbo (3037) ITR_KILLR 07-30-2002, 02:13 AM come on, somebody knows something!!!!! unlucky 07-30-2002, 02:28 AM I've come to the consensus that it realy doesn't matter... Some people say that the 72lb program doesn't idle right... and some say that it runs fine now.. Some say that the 4 bar 50lb program doesn't work right and is finicky.. I personally like the 50lb 4 bar program. It's cheaper and can make plenty of power. Unless you're going for 500whp.. I think the 72's are overkill.. Travis andris 07-30-2002, 03:07 AM I personally like the 50lb 4 bar program. It's cheaper and can make plenty of power. Unless you're going for 500whp.. I think the 72's are overkill.. Travis I'm inclined to disagree. Idle/drivability issues aside, the 72lb injectors will be cheaper. They cost more per injector; in either case you have to get the reprogram, but with the 50lb injs you have to also buy and setup an adjustable FPR. With the 72s you can just use the stock regulator, and even at 3bar, they will flow more than the 50s at 4bar. I'd take them over the 50s, even if just for simplicity's sake. IMHO, of course :) Andris unlucky 07-30-2002, 03:42 AM see... everyone has their opinions about this.. ;) ITR_KILLR 07-30-2002, 06:07 PM if i'm shooting for around @385 whp, then which? i know either would work. I'm leaning towards 50LB, but i like the idea of not having to mess with a FPR unlucky 07-31-2002, 01:32 AM 50lb 4 bar will work great for that.. Travis cnynracer1 07-31-2002, 10:02 PM My car did 380whp with the 50lb injectors, 4 bar setup using an Aeromotive Fuel Pressure Regulator. Idle is spectactular, I've been driving this setup for about 20k miles with absolutely no problems. The cars I have seen first hand with 72 lb injectors have had rough/bad idles, but this have been taken care of already. ITR_KILLR 08-01-2002, 12:07 AM 50LB 4 bar it is then! wheres the best place to get an aeromotive FPR? civicdragon 08-01-2002, 12:16 AM louisanaya@hotmail.com From sr20development unlucky 08-01-2002, 02:31 AM Originally posted by civicdragon louisanaya@hotmail.com From sr20development You mean from SR20 Performance? ;) Travis civicdragon 08-01-2002, 02:48 AM You know what? the whole time i've been thinking they were the same... so does he have a website? Originally posted by unlucky You mean from SR20 Performance? ;) Travis | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.