I'm leaving tomorrow morning for Kentucky. We are gonna go to the autocross at Grand Victoria on Sunday. Maybe I will see some of you guys around.

Hey its NismoGirl. I'm in Kentucky. Most likely I will be here till at least Wed or so *** I have some parts on order at Kerry Nissan for my car :) Yippie. Anyways it would be awesome to see some of you guys around.

I think I may go auto x on sunday, I havent gone for 2 years I miss it.

what about edgewater on friday night for test n tune. ill be there if anyone wants to show up. my car is a black 200sx with ky plate"tuned"

Brian

I gotta work friday I'll try to get ther soon I gotta get a 14 this summer

Originally posted by sakerocket1
I gotta work friday I'll try to get ther soon I gotta get a 14 this summer

;) Please don't break anything :p

Me break something? never I scoff at such a ludicris statement.
One of these days I'm going to finish my bushings and do some ball joints. You've done these havent you Jacen how bad is it?

I've done it before. It's not bad but you will need a press.


Blair

I've done ball joints. Here is an overview

Buy ball joints and rent ball joint press.
Remove control Arm.
Remove snap ring with snap ring pliers.
Whack old ball joint with big hammer. This part is fun ;)
Position new ball joint, then get press ready. This part can be confusing. :confused:
You want the ball joint press to contact the bottom of the ball joint and the topside of the control arm, but not the topside of the ball joint

If you come up here I can help and give your car an alignment afterwards.

Jason you do alignment. how much, sears wont do it because its lowered, tire discounters charger me 150 last time for my se(incluging camber bolts) but it pulled to the left and they said it was radial steer. even when i put stock wheels on, it pulled, so im done with them. let me know.


Brian

Originally posted by TUNED200
Jason you do alignment. how much, sears wont do it because its lowered, tire discounters charger me 150 last time for my se(incluging camber bolts) but it pulled to the left and they said it was radial steer. even when i put stock wheels on, it pulled, so im done with them. let me know.


Brian

I haven't thought about it. Usually I have work that needs done to my cars and I need a helper, and pizza. What suspension and wheels do you have?

We should have a geekout and maybe hit up the local go kart track after( way fun) I need to do bushings and balljoints and an alignment fun stuff what do you need done to your cars Jacen? Did Ben tell you we think we st the two man clutch job record on Brock Sepmans car. 1h 45 min . I was quite proud. We should do this soon I need a good excuse to go the the go kart track :)

right now, i have stock struts, eibach prokit, with 16x7 are carera's 205/45/16 toyos. my struts need replaced, so i would wait to do an alignment, i need to get a egt, my exhaust put on, fmic piping and a boost controller. if the offer is open in the future and you can help me, i will gladly lend a hand, and buy...

Brian

Originally posted by sakerocket1
We should have a geekout and maybe hit up the local go kart track after( way fun) I need to do bushings and balljoints and an alignment fun stuff what do you need done to your cars Jacen? Did Ben tell you we think we st the two man clutch job record on Brock Sepmans car. 1h 45 min . I was quite proud. We should do this soon I need a good excuse to go the the go kart track :)

I can't host a geekout. I'm not supposed to use my garage to work on cars. I try and work on just one car at a time so it isn't too obvious.

I set the other record for clutch job. 2 months and counting. I take it apart again tomorrow.

The 91 just needs the clutch to be working.
The 99 will be getting a Nismo rear insulator (firewall tranny mount), stillen adjustable rear sway bar, and longer front springs. That's all I can think of right now.

I have tomorrow available. Are you busy?
I would love to go to the kart track again. That thing is a lot of fun. speeds.cc

Originally posted by jacen99SE

I set the other record for clutch job. 2 months and counting. I take it apart again tomorrow.


Oh hell! I forgot to get back with you on that. I might be able to assist with pulling the tranny 'again' :D tomorrow. Let me see what my work schedule is like. I might be able to take it off.

I will definitely let you know this evening!

I am not the most mechanically inclined as some know here:) However, I would be more than happy to drive to Columbus or Cincy to help out. Let me know...

Curt

NismoPC came over on thursday and helped me remove the tranny (again) and put the disk in the right way (good job, me. D'OH). The 91 SE-R has now moved out of the garage! WooHoo!! :D

Time to work on the 99 <sigh> :rolleyes:

Originally posted by jacen99SE
The 91 SE-R has now moved out of the garage! WooHoo!!

I take it you replaced the fuel lines to the fuel filter, right? ;)

How's the clutch feel now! Glad to here it's running!

we need to set up a meet for nky and ohio peeps. any ideas?

Brian

Columbus Ohio would be central to those in Cleveland, WV., Indiana and Northern Ky.