would prefer to buy new but if used in good condition also will buy by let me *** cash on hand ready ...also n1 style saddle groove

i have bluebird pistons. the pistons are the same as the gtir's. i can get them cleaned up and ill check the skirt wear. but as far as i can see they look pretty good.i can get some pics to you once i get them cleaned. make me offer

thanks, tony

i have bluebird pistons. the pistons are the same as the gtir's. i can get them cleaned up and ill check the skirt wear. but as far as i can see they look pretty good.i can get some pics to you once i get them cleaned. make me offer

thanks, tony

clean them up show me some pics and since there *** u give me price as long as its reasonable i have no problems paying...

id say.. 30.00 plus 15 for shipping? also, do you want the rods? and what bearings are you looking for, i have crank bearings and rod bearings. i might also have the oil squirters too but i gotta check my other block and see if there still in there

thanks., tony

id say.. 30.00 plus 15 for shipping? also, do you want the rods? and what bearings are you looking for, i have crank bearings and rod bearings. i might also have the oil squirters too but i gotta check my other block and see if there still in there

thanks., tony

how about 80 shipped(06710) for bearings,oil squirters, pistons and rods..?let me *** im very interested.

oil squirters w/ hardware $75 shipped

oil squirters w/ hardware $75 shipped

what u mean hardware..i seen oil squirter goin for alot cheaper..expain..please

ill check tonight on the bearings and squirters. but ill give you the rods and pistons for 50 shipped. then ill throw in the bearings and squirters in for free. but ill let you know for sure tonight.

good luck throwing used bearing into an engine build.

sorry, dont have any squirters. and like blurr said you might wanna buy new bearings. i have the bearings and i can still send them too you but i wouldnt recommend using them. i just dont want anything to go wrong with your engine from using them

$64 for 8 bearings here:
http://www.courtesyparts.com/betasite/kb_search_result.php?keywords=[12111]+\(b13&cPath=2490_2491_2492_2500

pm me and let me know what you wanna do.

what u mean hardware..i seen oil squirter goin for alot cheaper..expain..please



then buy them cheaper. I stand and guarantee all of my parts I sell.

The squirters I have available look brand new.

then buy them cheaper. I stand and guarantee all of my parts I sell.

The squirters I have available look brand new.

sorry bro..ill keep u in mind,not payin that much for used parts...

good luck throwing used bearing into an engine build.

where could i buy new det bearings...?:confused:

no need for apologies. Youre slightly misguided if youre looking for NEW oil squirters and USED bearings :rofl:

most of the vendors on this site can get you DET bearings.

no need for apologies. Youre slightly misguided if youre looking for NEW oil squirters and USED bearings :rofl:

most of the vendors on this site can get you DET bearings.

lmfao..whatever u say ..makes u feel better:biggthump..obvisously ur reading impaired because u read i said "would prefer" new meaning bearings..and used squirters..common sense..im *** not paying that much for something thats used...but like i said if makes u feel better typin way knock ur self out

Im not doing it to make myself feel better. Why do I care? I have like 5 sets of oil squirters LOL. Ive been installing oil squirters into DE blocks before you even knew what an SR20 was... Used or new they work the same!
They dont wear out or degrade, unless you damage them structurally. But good luck finding new ones of those.

Anyway, Just trying to send you in the right direction. Good luck w/ your build. Again, contact a good vendor on this forum and theyll take care of you.

Im not doing it to make myself feel better. Why do I care? I have like 5 sets of oil squirters LOL. Ive been installing oil squirters into DE blocks before you even knew what an SR20 was... Used or new they work the same!
They dont wear out or degrade, unless you damage them structurally. But good luck finding new ones of those.

Anyway, Just trying to send you in the right direction. Good luck w/ your build. Again, contact a good vendor on this forum and theyll take care of you.

hahahah owned

Youre slightly misguided if youre looking for NEW oil squirters and USED bearings :rofl:

Quoted for truth....:eek2: