injectors,ecu,clutch are all installed!

yesterday I tapped the block for line out of water and oil, and I fitted a T for my line in of water.

When I drill to find my oil line in (for my t-25) in the block, I didnt find it!

So I think that the oil line in from my sr20det(blown) did not exist on my sr20de(1995)

So, my question, how you guys take oil pressure to your turbo!

the oil suply comes from the oil sending unit tapping on the back of the block just behind and below the oil filter.

here is a page that explaines it pritty good. http://www.brazosport.cc.tx.us/~lshadoff/turbo/