For those of you running turbo setups with 370cc injectors and stock MAF, you guys might want to get in on the group deal for the Techtom CMX.

First of all it has very easy to read numbers. Very good as a water temp gauge which is the main reason I am buying it.

Also, it has readouts for MAF voltage and injector duty cycle. This is very key to seeing if you are maxing out your MAF at 5.1V or running your injectors too close to the edge on cold nights. It is very easy to max these out with even a T2(small). :)

I agree, Terrin. And not just because I'm running the Group Buy. :p

Since installing my CMX-100 last Thursday, I've learned a LOT about my engine and the envelope it's operating in.

For instance...I now know that I am using 86% of my 370cc injectors flow at 8psi at WOT with the T28. The peak recall feature lets you make a hard pull/run/pass and then see just how high the injectors or MAF were taxed on that run. That kind of info is worth every penny of the $140 I paid for the CMX last week, IMHO.

I know how much room I've got left, and will also know when I get over that edge. Good stuff.

The age old question, HOW MUCH? I was gonna get the Apexi Multimeter but it fell through. So what are these going for with the group buy?

~120

max voltage on a stock MAF is closer to 5.19V as i recall just in case anyone really cares.

Terrin whats up man, hows everything going? havent heard from you lately.

Hey, this sounds good. So how do I get in on this group buy because I am in. I'm running the 370 injectors, stock MAF, and T28, so this seems like a great little tool.

Let me know.

Thanks,
Tommy

Tommy, Mike, and others--

The Techtom Group Buy I've arranged can be found in the General SR20DE Forum, as a sticky post at the top of the page.

Direct link: http://www.sr20deforum.com/showthread.php?s=&threadid=23062&perpage=20&pagenumber=1

Thanks. :)

TOM!!!!!!!!!!!! What's up! I haven't heard from you in hella long. How was Japan? Give me a call dude.


Terrin