Anyone who is running Freak headers has them fitted whilst also having a whiteline 4 point LCA brace? There is normally not much clearance between the brace & flex pipe, and the Freaks hang lower.

58 views, anyone?

not too many people here with pulsars really..

If anything, put some foam on the brace so the 2 pieces don't knock together and drive you crazy. I've got a friend with a Whiteline 4-pt brace in his B13 and he complains that it gets banged up on the street. I tell him it's better to have a scuffed brace then a bent downpipe. Look at it as insurance for your parts.

I'll bet it doesn't fit. The 4-1 collector and the 3" outlet are bound to eat too much ground clearance.

_SHig

I'll bet it doesn't fit. The 4-1 collector and the 3" outlet are bound to eat too much ground clearance.

_SHig

Thanks, that is what I was thinking. The fuji's just fit, and are protected nicely by the 4 point. My 4 point does get abit of a beating on ripple strips etc, wouldn't want to think what would happen to the Freaks.

I had one with a fuji and it barely cleared. I would be almost sure it will not clear.