Alright i've still got some little things to do but i figured i would throw some pics on here. Ive been done for a few months now but ive just been hella busy.
http://i182.photobucket.com/albums/x252/xex4u2nvx/DSCF0102-1.jpg
before

http://i182.photobucket.com/albums/x252/xex4u2nvx/240enginebay001.jpg
after

http://i182.photobucket.com/albums/x252/xex4u2nvx/DSCF0103.jpg
before

http://i182.photobucket.com/albums/x252/xex4u2nvx/240enginebay002.jpg
after

http://i182.photobucket.com/albums/x252/xex4u2nvx/DSCF0106.jpg
http://i182.photobucket.com/albums/x252/xex4u2nvx/DSCF0107.jpg
before & before

http://i182.photobucket.com/albums/x252/xex4u2nvx/240enginebay003.jpg
after

http://i182.photobucket.com/albums/x252/xex4u2nvx/240enginebay004.jpg
almost end result


and a couple harness pics, *** there were some alterations after i took the pics...
http://i182.photobucket.com/albums/x252/xex4u2nvx/Megans001.jpg
http://i182.photobucket.com/albums/x252/xex4u2nvx/Megans002.jpg
http://i182.photobucket.com/albums/x252/xex4u2nvx/Megans003.jpg


Things would be a little cleaner *** i was having a problem with my CAS and kept changing things until i found the problem. The overflow resevoir will be located in front of the radiator behind the vertical core support. The profec actuator will soon be mounted and the vac lines to it will be better hidden. Some parts of the wire loom still need to be tapes and secured but things are mostly where they will stay.

paint those brake lines!

Would be nice if they blended into the firewall wouldnt it...

Nice tuck!

Would be nice if they blended into the firewall wouldnt it...

yes, yes it would. im prolly painting mine today.

or it your baller just get SS lines for everything, then u dont have to hide them lol

Nice tuck!

thanks man

I think you're lying...there are no wires. :)

The IACV, knock sensor, coolant temp sensor, tps, and the wires for the injectors are all under the intake runners. Of course the o2 and coilpack plugs are sitting on the tranny. the rest of the plugs are run across the bottom of the engine bay so as to avoid being seen.

Where would i get that little cover that covers the spark plug wires and whats it called?

Prolly not the best thread to ask on, but I would try ebay first. Its just the Coil Pack Cover. Several companies make aftermarket covers as well.

heres a quick pic of my tuck..
http://i38.photobucket.com/albums/e115/eastsidedrifto/IMG_0259.jpg
All the wires where extended so all the fuse boxs fit under the dash..
http://i38.photobucket.com/albums/e115/eastsidedrifto/IMG_0054.jpg

If run that stuff in front of your valve cover down by your sway bar and then come up behind it, it will clean up that area a good bit, not to mention you'll be able to take off the metal clip holders you have attached to the valve cover.