Does anyone happen to know an easier way to remove the stock injectors, I am changing the injector seals but it is a ball buster to try to do it with your hands and twisting wondering if there is an easier way. Also anyone who ever takes off those screws on the top of the injector by the clip replace them with bolts, it is so much easier for next time taking them off and putting them back on. TIA.
Sean

I put a wrench on the top of the injector and just kept twisting it back and forth and worked it out. Since you have taken the screws out of the injector retainers it should be easier next time around. I always spray like wd-40 on all screws and bolts I take out so it's a lot easier the next time.