I have two sets of low milage jdm highport cams, a nice cheap upgrade to the b14 guys. $35 shipped for the intake cam (all you need for upgrade) let me know if you want both cams for a fresh set.

I set of JDM highport intake runners, great for egr delete the clean way. $35 shipped for these.

I also have some other parts available from some spare jdm motors.

I have a highport head in good condition, has all valvetrain in tact minus cams.

I have many other little parts such as a coil pack, and several other motor parts. Let me know what you need and i will see if i have it. Open to offers. Now lowballs. I remember back in the day when the highport cams went for 70 bucks plus shipping. haha. guess im just an sr20 oldie. haha

got any cat backs for the b15 sitten around ?

so that is a pretty straight forward mod for a b14 right im somewhat new to the game but i did some research. shipping to 85032? also if you do the egr delete you will get a cel unless you have a 0bd2 g20 ecu or equivalent correct?

incorrect, i believe you can leave the egr temp sensor plugged in and it wont trigger the cel. i could be wrong but im pretty sure. ****** the manifold would not work on the b14, its a highport mani, not lowport.

The cam is a very straightfoward swap. Pop old one out, pop new one in, no breakin required and just go and feel the increased power through the rpm range. It is a noticable diffence, a good start if you cant afford to go big with the jwt's, cant beat $35 bucks shipped for the gain. Its 35 shipped for the intake cam, you dont need the exhaust cam, they are identical.

ive just started modding my 98 se-r so im sort of short on cash right now but if you hold on to these for about a week i would snag the intake cam if not both...

bump, still have many parts, just ask, dirt cheap, needs to go.

I set of JDM highport intake runners, great for egr delete the clean way. $35 shipped for these.


what are these?? i have a U12 BB and just wondering if these would give me hp gains??

not really, im not sure if the u12 has egr ports on the intake manifold but if so these just eliminate it and yes they would work fine, same motor basicly. but most of the jdm motors dont have egr but i think ive heard of the u12 having them but i could be mistaken. that would be something you could answer. Ive also heard the n/a jdm sr20 intake cam is actually an upgrade also. but again you could search it yourself to find out for certain, i heard this a while back.