anyone know the programming procedure for a b14 to reset the coding on your keyless entry keyfob? i put in new batteries and now it doesnt work.

get in the car and lock all doors with the power switch. (you might want to roll the windows down so you don't bake)

insert and remove the key from the ignition 6 times in less that 10 seconds. The hazard lights will flash. if they don't, unlock then lock the doors again

turn the ignition to the ACC position

press the lock button on the remote. the hazards will flash

unlock and lock the doors

press the lock button on the other remote

when done, turn the car off, and go cool off in the AC with your favorite cold beverage.

you have to reprogram all remotes at the same time.

what if i nly have one remote? just hit the lock button once?

BTW i didnt see the other guys thread about the same topic so dont give me crap about that :)

If you only have one remote, then once you program it, you are done.