RoadMagnets or HyperCo Gen II Springs B14 [Archive] - SR20 Forum

: RoadMagnets or HyperCo Gen II Springs B14


SR20WhoKnew
07-28-2008, 12:19 PM
I'm looking for front and rear springs for a B14. I'm looking for RoadMagnets
or Hyperco Gen II's for a B14. I'm going to be putting them on AGX's.
PM me if you have a set. THanks:biggthump :biggthump :biggthump :biggthump

MR-4Door-SR20DET
07-28-2008, 12:40 PM
Good luck finding some Hyperco GenII's. You can make a thread and bump it once or twice a week and wait months to get them or go with the RM's right off the bat. I would like some for my B13, but they seem to be extinct :eek2: . Look to spend anywhere from $300-$350 for a set when you find them.

dmp316
07-28-2008, 12:49 PM
you are not going to find hyperco's Unless someone is parting out a B14 with them. Or someone has had them on but is selling their car without them. stick with the roadmagnets.

SR20WhoKnew
07-28-2008, 01:46 PM
Thanks

MR-4Door-SR20DET
07-28-2008, 02:27 PM
you are not going to find hyperco's Unless someone is parting out a B14 with them. Or someone has had them on but is selling their car without them. stick with the roadmagnets.

^Curious how many where made for the B13 and how many were made for the B14?

http://www.hypercoils.com/

^I hear you can get them speacial ordered from here, but I haven't looked into it that much. I'm going with RM's on my N/A car and my turbo project.

SR20WhoKnew
07-28-2008, 02:43 PM
Well if anyone has some RM for a b14. Then PM me. I'm going to be running
the RM/AGX set up with koni bumpstops

daveracer
07-28-2008, 02:54 PM
I have a set of Gen II Hyperco's already mounted on AGX's. This is for the b14. If you want just the springs, i'll sell just the springs. If you want the whole setup, i can do that too. Let me know.

Make me an offer through PM's. I'm sure you know how rare these springs are and what they're worth!

iczer200sx
07-30-2008, 02:02 PM
i have a set of roadmagnets mounted on agx struts, koni bumpstops, and all new hardware (tophats, bearings, boots, etc..) i'm debating whether or not to keep the setup, so PM me an offer for what you need and i'll probably take them off if the price sounds good. these were bought not too long ago, so very low miles on the setup. i'm also located in SD so that should make things easier.