I got to adjust my timming on my SR20DET. What timming sould i adjust it. Someone told me 20 is that correct

thanks

If you are running the JWT ECU I would set your timing to 15 degrees. Anymore than that you might run into some problems with detonation and what not, I would not even try to run my DET at 20 degrees.

I ran 17 degrees for awhile on my det w/ Jwt setup it ran fine ,pulled hard....it's now at a safe 14 degrees.

Im running 15 and its running strong and hard...I didnt want to go any more due the heat and what not...

*** about with a bbecu???

fredo