I have a GT2871R up for sale. It is the one with the .64 exhaust housing. The compressor housing has a 3 bolt outlet flange and 2 bolt inlet flange. I will include the extra pieces to connect your intake pipe and compressor outlet pipe to it. I can get pics upon request. I bought it with the fins damaged. I can get pics of it tomorrow. I drove the car today and it still makes boost but when I turn it off I hear a slight screeching coming from the turbo. I don't know what the problem is nor do I have the time to try and dianose it. I am going with a way bigger setup and no longer need this. I have to pay off debts. I am asking 450$ SHIPPED for the turbo/actuator/inlet/out.

Bump. I will also include a GTi-R manifold and J-pipe with this deal.

Also will sell my 3'' downpipe I ran with this for another 80$.

Take it all for 800$!

Bump for a smoking deal!

Thanks bro. I will be pulling this off hopefully tomorrow. I also forgot to mention it has the fitting from ATP. It is the feed into the turbo. Has a built in restrictor and made for -4 oil lines.

Also has an aftermarket HKS wastegate actuator on it. I just got home from a 15 hour shift so I am trying to decide whether I am going to pull it off today or tomorrow. Sorry for the delay guys but its tough trying to find time between school, two jobs, and bad weather.

New prices:

Turbo including inlet/out/couplers- 550$ shipped

I will have pictures and video shortly.

Here is the video of me spinning the turbo. It spins freely and now I do not hear any noise coming from it. The blades look terrible but I purchased it this like and was in the car while the turbo was still in the condition running strong. There is no/very little shaft play from what I see side to side or in and out. Pics finally uploaded now. Must sell. In some serious debt...

http://i3.photobucket.com/albums/y89/Bes_SR20/th_Picture089.jpg (http://s3.photobucket.com/albums/y89/Bes_SR20/?action=view&current=Picture089.flv)

http://i3.photobucket.com/albums/y89/Bes_SR20/Picture081.jpg
http://i3.photobucket.com/albums/y89/Bes_SR20/Picture082.jpg
Next to my old T28..
http://i3.photobucket.com/albums/y89/Bes_SR20/Picture086.jpg
http://i3.photobucket.com/albums/y89/Bes_SR20/Picture087.jpg
Oil line. Yes, I had a serious exhaust leak so its covered in black, lol...
http://i3.photobucket.com/albums/y89/Bes_SR20/Picture088.jpg

The noise in the video is from the little stick when I was moving it around. Video is not perfect but you get the idea. I was lazy to pull off the intake pipe but if you guys want I can remove the j-pipe and inlet and take another video tomorrow.

Hey Bes, if I round up some $, would you be interested in a BNIB b13 stillen FSTB+cash?

I would of liked one of them on my car but unfortunately I have a GTi-R swap in my car and the only strut bar I saw that fit is the Cusco. I'd like to hold this for you bro but I finished up my court case with the 102 in a 65 and got nailed for something I didn't do. I am trying to get together 1600$ to pay everything off.

ok, I'll try to sell off a bunch of parts to see if I can get this off you. What injectors are ideal to run with this?

My cousin is running 444's @ 4 bar with his 2871r setup. Had it up to 18+psi with no problem. I would run some STi 520's with this. The only thing holding me back is having a GTi-R rail and not being able to run aftermarket fuel injectors.

Bumppp

Here is a picture of the GTi-R j-pipe. Sorry for the confusion. That is an avenir j-pipe on the turbo.

I am willing to let this go for 700$ picked up by this weekend. Have bills that must be paid.

My cousin is running 444's @ 4 bar with his 2871r setup. Had it up to 18+psi with no problem. I would run some STi 520's with this. The only thing holding me back is having a GTi-R rail and not being able to run aftermarket fuel injectors.

I am running msd 72's in the gti-r stock rail:confused: I think there was some machine work done, but I don't think it would cost that much to have your stock rail machined to fit any after market top feed injector.

Anyway, so your saying that there is nothing wrong with this turbo except some chips on the compressor blade?

And how much for just the turbo shipped? Also what hp level is achievable with this turbo?

If you sell the turbo im interested in everything else

I am interested in this with everything for $700 but would you please take videos of you spinning the turbo with your hand so it will actually spin freely.

I am running msd 72's in the gti-r stock rail:confused: I think there was some machine work done, but I don't think it would cost that much to have your stock rail machined to fit any after market top feed injector.

Anyway, so your saying that there is nothing wrong with this turbo except some chips on the compressor blade?

And how much for just the turbo shipped? Also what hp level is achievable with this turbo?

Honestly, I can just go by what I see/hear/feel. The turbo spins free and currently does not make any noise. I heard some noise when I had it on the car but I have no idea what it was. I pulled off the setup and now am running a totally different setup because my buddy Nick parted out his crazy turbo sentra and I bought some goodies off of him. I believe this turbo should make 375+whp on high boost with supporting mods of course. Tuning is what matters most.

I just worked a crazy shift and am going to hit the sack right now. I will post back in the AM with updates and PM you guys.:biggthump

pm sent iwould like to buy the inlet flange off that turbo

Bump! Seen the turbo myself. Definitely a good deal.