|
MadNX 08-18-2002, 09:27 AM I was just at JC Whitney looking around and under Sentra-Lowering Springs they have APC Lowering Springs for the 91-94 Sentra SE-R. These will work for the NX right? and has anybody ever heard about the quality of these springs? oh and they lower 2" in the front and 2" in the back. Here is the link... http://www.jcwhitney.com/product.jhtml?CATID=157690&BQ=jcw2 AaroNX 08-18-2002, 04:00 PM APC=BAD BAD BAD BAD BAD MaddMatt 08-18-2002, 06:07 PM If it's made by APC, you can be sure it's made to the lowest quality standards possible. You get what you pay for. Scud 08-19-2002, 01:06 PM APC = All Poorly Constructed :p Pretty White 08-19-2002, 02:34 PM You mean Acura Products Company?:D They really should be called All Pieces of Crap. ;) NismoNx2000 08-19-2002, 02:44 PM Run as far away from them as possible!! And if u actually did feel like wasting your money on them, they wouldnt be the right size for the nx anyway. The nx stock has taller front springs then the se-r. So, it would turn out to be even shorter then 2" in the front, which in my honest opinion is too much on an nx to begin with. At the most, got 1.5" on the nx. Go with the eibach pro-kits and some kyb gr2's, or if you want to be able to adjust them, then go with the agx's. | ||