Since I've been messing with just about every part of the car, I figured I couldn't spare the brakes. :o

Did a full rebuild on the front and rear calipers. New seals etc etc. ($hit job btw!!)
:x

Then had them sandblasted and decided it's time for some new paint too. 8)
http://www.streetneeds.com/uploads/auser/frontad22vf.JPG
http://www.streetneeds.com/uploads/auser/painted.JPG
http://www.streetneeds.com/uploads/auser/paintedcalipers.JPG
http://www.streetneeds.com/uploads/auser/rearspainted.JPG


While I was at it I figured I better get rid of the ABS sensors as well. The rear ABS sensors have a little arm that interferes with a normal 2.5" exhaust, and I need space if I'm gonna squeeze a 3" in there... :twisted:

BEFORE

http://www.streetneeds.com/uploads/auser/abs3.JPG

CLEARANCE WITH STOCK EXHAUST:

http://www.streetneeds.com/uploads/auser/abssensor2.JPG

Picked up some "used" non-abs lines from the breaker yard:

http://www.streetneeds.com/uploads/auser/nonabslines.JPG

ABS CONTRAPTION REMOVED: x 2 (TOTAL WEIGHT SAVING - ABOUT 0.8KG :roll: )

http://www.streetneeds.com/uploads/auser/abssensor.JPG

AFTER

http://www.streetneeds.com/uploads/auser/newsetup.JPG