im swapin a sr20 in to my SE and the guy that had the wreaked se-r i took the motor from took the injectors out for some reason.

so im puttin them back in and my step brother said that it they dont seal right that the will shoot gas everywhere, so how do i seal them good and do you have any tips on puttin them in


thanks

Shouldn't be much of a problem. Best thing to do would be to get new injector o-rings for the top and the large rubber o-ring for the bottom of the injectors. Put a little lithium grease or something similiar on the o-rings to make sure they seal against the injectors good.

ok thanks