PHEEBE
08-19-2002, 12:21 PM
We installed a brand new stock clutch in a 96 200sx 1.6,
after taking the tranny off and removing the clutch (warped),
We installed in the new one, Everything So far so good but after we put it back in the tranny and mounts we hooked up the cable but it was way to loose IT GAVE ALMOST NO PRESSURE we adjust all the way and barely any pressure on the peddle its so soft and doesnt pop back up al the way, Is this common or did we screw up some were, or do the cables stretch that easy, is their another adjuster on their that i dont other that the next to battery. has anybody ever done this before and happened to them or do i need to just go buy a new cable.
tips anything will be great
Help will be greatly appreciated.
TIA
:)
after taking the tranny off and removing the clutch (warped),
We installed in the new one, Everything So far so good but after we put it back in the tranny and mounts we hooked up the cable but it was way to loose IT GAVE ALMOST NO PRESSURE we adjust all the way and barely any pressure on the peddle its so soft and doesnt pop back up al the way, Is this common or did we screw up some were, or do the cables stretch that easy, is their another adjuster on their that i dont other that the next to battery. has anybody ever done this before and happened to them or do i need to just go buy a new cable.
tips anything will be great
Help will be greatly appreciated.
TIA
:)