i just have finish my swap of a sr20det on my nx1600
all is ok exept something

i have a bb ecu with this code 23710 1e010 a11-000- e 53
and a nx2000 maf but when i ran my engine with my bb ecu my car run really too rich and the ecu give me a trouble code 12( maf)

but when i run my engine with a stock nx2000 ecu all rune perfectly and the ecu give me only the oxygen sensor problem ( all is ok because is the jdm oxygen senor)

did you think a other maf work with the u13bb ecu
or i have to reground them
or my ecu is not a bb u13 ecu

thx a lot

It's a well-documented fact that many US-spec MAF sensors don't play with many Bluebird ECUs. Some do, some don't, it's up to you to have the balls to try. Get the Bluebird MAF sensor, or get your ECU reprogrammed to use the NX MAF sensor (or an even bigger one, if you can afford it).

thx
first time i see that
all people i know with a det and bb ecu have no problem with the maf

where can i find a bb maf ??

Pat on npclub.com had one for sell a while back...

By the way, I'm Jean-Seb!