I was hoping that someone could help show me how to route a aftermarket catch can on a Gtir motor thanks

there's a hose that runs off a T from the valve cover on the passenger side that goes to the intake hose. cap the nipple on the intake hose, and run a hose to the catch can from the T and vent it to air, or u can recirc it back into the intake hose.

Do I do any thing with the pcv valve and the hoses running off the itb or no

no dont mess with the pcv valve and the hose that comes out of the oil catch should go into the intake before the comp housing. if you just vent the oil catch can you have to posibility of bad air fuel mix during shifts

You don't touch the hoses on the timing chain side, just the valve on the distributor side. if you take the intercooler off you'll see a big black rubber hose running from there to the intake hose.