Attached.

Thanks Calum do you have the bin/program for the n1 cams because that it what I have in my motor. Let me know what you can do for me

I've never worked with N1 cams. That was tuned for SR16 cams.

Oh i see then can you modify an existing bin file for a vvl with n1 cams and just modify it for bigger 370cc injectors and e-60 maf or should I use the bin file with sr16ve cams and 370cc injectors? Also when can I ship my ecu to you so i can make it a b14 realtime ecu, I seen that SentraDude shipped his to you, so I was hoping I can ship mines to you too. Please let me know asap. Thanks Here's the link for the bin file with n1 cams and 333cc injectors: http://www.sr20forum.com/rom-ecu-tuning-file-exchange/235926-b14-ecu-ve-injectors-n60-maf-n1-cams.html

I've never worked with the N1 cams. I would need to have a car on a dyno.

Ok cool thanks Calum do you a bin file then for a b14 with sr20ve, n1 cams, 333cc injectors, and an e60 maf? Here I found a bin file with all my current mods but instead of an e60 maf the bin is programmed for a n60 maf. Is there a way to change the maf to an e60 maf or will the car run fine with this bin file even though it's programmed for a n60 maf? Here's the link to the bin file with all my mods but with the n60 maf. Thanks

http://www.sr20forum.com/rom-ecu-tuning-file-exchange/235926-b14-ecu-ve-injectors-n60-maf-n1-cams.html

I've never worked with the N1 cams. I would need to have a car on a dyno. I've posted a bin for the VE injectors E60 maf somewhere on here, let me dig it up.