|
Calum 12-09-2008, 06:31 PM Can someone test this out for me? This is just devious' basic launch control, no timing retard stuff. If it works I'll patch in his timing retard function too. This is an otherwise stock bin btw. Thanks! Edit 12-9 10PM: Changed the bin. Calum 12-11-2008, 03:30 PM This works btw. I'll patch in the timing retard stuff, and post a new xdf sometime. Fun stuff! wnwright 12-11-2008, 11:46 PM Awesome I'm going to have to try this out this weekend. gtswrx 12-12-2008, 01:57 AM keep us posted! steverino74 12-14-2008, 08:24 AM the timing retard stuff is awesome. i used it tuning a few KA-T's. silly people that cut the speed limiter wire have to reconnect it (i had this happen on a s13 that the kid wanted to go past 115 so he cut the wire and the ecu thought the car was always at 0kph and wouldnt rev past the launch :P) rwd sr (no ignition retard) - .9 bar @ 4700 according to the defis) http://i132.photobucket.com/albums/q19/smelly240/th_DSCN0001-1.jpg (http://s132.photobucket.com/albums/q19/smelly240/?action=view¤t=DSCN0001-1.flv) trbob13 12-24-2008, 01:46 AM how much is it for a tuned ecu for a 98 se-r with the launch control and rev? chrisbakalah 12-24-2008, 02:56 AM how much is it for a tuned ecu for a 98 se-r with the launch control and rev? ahh i was once like you my friend calum doesnt do real-time or the other good stuff to our b14-1998 you can get a 95-97 ser ecu and send that out to him and a little re wiring for the ecu.. correct if i am wrong or missed something trbob13 12-24-2008, 06:41 PM :biggthump i spoke with andreas miko annd he told me that i need a 95-97 ecu and have it tuned for a 98 and have him delete the rear o2 sensor and it is supposed to work fine:biggthump beto_dc 01-04-2009, 05:03 AM any updates on this? kinda interested! gtswrx 01-07-2009, 01:32 PM How to change the rpm at which it cuts timing? What is the address on the B14 bin? ThE_mOnKy 02-26-2009, 01:47 AM anyone knows the addresses for the launch control?? i want to modify the rpm's for the launch control, thanks!! wnwright 02-26-2009, 12:45 PM Do not use that bin. It has a mistake in it. The addresses were already post in another thread that detailed the problems with the bin also. fordy 02-02-2010, 03:03 PM sorry for the bump but will this work with a s14 sr20det? alfsentra 02-15-2010, 04:03 PM Updates? robertsr20 02-16-2010, 08:43 PM Updates? Esta muy frio este tema amigo, creo que una rutina esta mal platicamos mas tarde :biggthump Sr20Gtir 02-23-2010, 12:58 AM what about the one for the B13? i found the old bin but isnt there a new one with the timing retard stuff put in? im trying to find it but i cant.... robertsr20 03-02-2010, 05:11 PM what about the one for the B13? i found the old bin but isnt there a new one with the timing retard stuff put in? im trying to find it but i cant.... For the b13 work 100% but never see anything about timing retard for b13, can you share the link about that? | ||