http://img.photobucket.com/albums/v689/93s13/B13%20SE-R/12-14-08_B13Connector.jpg

Can't figure out where this connector goes. It's on the end of the injector harness, right next to another connector that goes to the egr system. Hopefully someone can take a pic or something! lol

That was on my harness so I cut it off no problems

Looks like EGR

If you just put a JDM motor in your car, that connector goes no where. Just zip tie it off to another wire. I wouldn't cut it. I have that same plug not plugged in anywhere on my car.

Well, it's a91 USDM G20 Motor with a JDM upper intake manifold so i could delete the egr crap. And I found a pic I took of the engine when I first got the car, and it looks like it was free floating on the stock motor as well, lol. WTF?

Well, it's a91 USDM G20 Motor with a JDM upper intake manifold so i could delete the egr crap. And I found a pic I took of the engine when I first got the car, and it looks like it was free floating on the stock motor as well, lol. WTF?

^Interesting. Did the old pic have the USDM intake manifold with all the EGR stuff on it? It should have been plugged up.

EGR temp sensor. Unless you have a CA car, or a '94 + car, don't worry about it.

EGR temp sensor. Unless you have a CA car, or a '94 + car, don't worry about it.


2X. Mine is a 92 Nx2000 and it was taped on the side .

Mart

Yup, my buddy who's a master tech @ nissan told me, lol. Thanks!!!