does anyone have pictures of a aeromotive fpr mounted on a ftf fuel rail????
Sean

Well I’m sure you know this so don’t think Im being a dick, but there is no visible difference betwen mounting the Aeromotive FPR on a JWT rail or FTF rail. The Unit is completely separate from the rail. The nice thing about the FTF rail is that it does not have the hole for the stock FPR in it. It is on a separate piece. So mounting the Aeromotive is much easier. There is no need to plug the hole that would be in the side of the JWT unit. Unless Terry has changed the design.

Here is a picture of the Aeromotive unit on a BB setup that is still in the works. The owner is probably going to shoot me but O well. It’s too cool.
http://www.azmustangs.com/AZimages/memberpics/shawn/bryan/5.jpg

That looks good. What is included in that item?

Here is what it looks like out of the box. The gauge will cost you another $20-30 and the fittings about $10-12 each. You will also need about 2-3 feet of extra fuel line. Our cars use 5/16 fuel line.

http://216.242.145.16/products/prod_imgs//img-10-1-large.jpg

and the rest of the info on there web site.

http://216.242.145.16/products/product.phtml?p=10&large=1