Calum i don't find any information for these daughterboard, i find only for the real time and b13 basic daughterboard, can you help me?

I realy need help for this because the ecu´s don´t work, i tried to install the daughterboard to myself and isn´t work, what can i do?

Sorry, I missed this post.

http://www.sr20forum.com/calumsult/191962-b13-realtime-daughterboard-install-guide.html

Scroll down to the B14 board installation instructions.

For instruction on how to burn a chip-

http://www.sr20forum.com/calumsult/164481-how-burn-rom-moates-burn1.html

Sorry, I missed this post.

http://www.sr20forum.com/calumsult/191962-b13-realtime-daughterboard-install-guide.html

Scroll down to the B14 board installation instructions.

For instruction on how to burn a chip-

http://www.sr20forum.com/calumsult/164481-how-burn-rom-moates-burn1.html

Ok but these is for a realtime board, is the same for a basic daughterboard?

Thanks.

Yep.

http://www.calumsult.com/calumsu/Product%20Manuals/B13%20T%20install%20pics/B14%20RT%20wiring%20-%20jumper.JPG

That's pretty much all there is to it. Install ribbon cable, set jumper, burn chips.

Let me know if you've got problems. If you've got the board and jumper installed correctly, then odds are you don't have the chips burned correctly. Make sure you set the chip index to 0000 (not 8000 like on the B13/S13) and make sure your using a good B14 base bin, and that it hasn't gotten corrupt or something.

yes i burn the eprom start address 0x0000 to 0xffff because b14 bins are 64 bits don´t have problems, and don't forget the info for the vvl thanks for all.