i have a 92 sentra Se-R and i just replaced the motor... the problem i am having is that i've put to much time into this build between engines that i've forgotten where all the vacuum lines coming from the intake plug into. i've located most of them but still have a couple that are giving me problems. any help would be greatly appreciated.

and just to let you "veteran" sr20 members know.... i have already search this on here as well as google and wasn't able to find anything. so please don't fill this thread full of postings saying nothing but "search" over and over :biggthump

I had the same problem when installing my jdm sr. I searched and found what i needed on here. I had the diagrams saved on my computer but lost the others. This is the only one i have left, but it should be of some help although it is for turbo. The diagrams are a bit hard to find, but i assure you they are there.


Best of luck.

-James

http://c1.ac-images.myspacecdn.com/images02/29/l_98ed3c07cde3419f9421f0e85d255408.jpg

thanks for that diagram it should get me somewhere.

if these diagrams are out there to find, anyone that has found them in the past if you could let me know where you searched for them that would help

theres usually one under the hood of all cars that is for the emissions system and you can usually figure shit out that way..

BTW its schematic, may help you search if its spelled correctly

ok idid some more searching and i was able to find a couple threads on here with vacuum line diagrams, but the pictures don't work anymore. so if anyone has any of these diagrams saved i would greatly appreciate it if you could send them to me or if someone has a sr20de sentra from 91-94 with the diagram under the hood they could take a pic of and send me, since mine is no longer there. thanks

Try this

http://www.sr20forum.com/general-sr20/241889-feeler-intake-exhaust-kit-4.html#post2377527

hey bluebomber, thanks SOOO much that was exactly what i've been looking for. everything i needed is in that pic

no problem, I would say hit up superblack if you had anymore questions about it! :)

I got this?:
http://www.sr20-forum.com/forced-induction-turbo/250-rerouting-vacuum-hoses-jdm-intake-manifold-turbo.html

no problem, I would say hit up superblack if you had anymore questions about it! :)

No worries, I have suffered tracing every damn vac line under my hood for leak check, replacements, etc, one of my favorite jobs ;)

But, it fixed my idle problems last year :D