|
DenverSER 08-26-2002, 05:48 PM I did some searching but could not find an answer, can I run a G20 ECU on my '98 without modifications? Or do I have to do the same thing as with a JWT ECU? Meaning a '95-'97 O2 sensor, move some vac hoses, etc. TIA Jerrod RollcageSR20 08-26-2002, 06:36 PM Originally posted by DenverSER I did some searching but could not find an answer, can I run a G20 ECU on my '98 without modifications? Yes. Or do I have to do the same thing as with a JWT ECU? Meaning a '95-'97 O2 sensor, move some vac hoses, etc. Yes, if you want to the car to run free from check-engine lights. 98sr20ve 08-26-2002, 08:13 PM And you need to check you TPS at WOT not just idle. After I put a JWT ecu in my 98 it would not read 4 volts at WOT. I had to disconect the 3 wire plug behind the drives side rear wheel and also the boost sensor on the firewall. No biggie just something to know. DenverSER 08-27-2002, 12:47 PM Cool thanks for the tip:) | ||