i will be there, minus rain. i hope to have the s03's on, and i might break the 13's


Brian

you can count me in, if it rain's i say we shoot for the next following sat. what time are we going to meet, or do you want to meet somewhere around work, and go up together? post back and let me know. adam

if anyone doesnt know where tristate is, ask, so we can pick a good meeting spot. i am open for suggestions.


Brian

we should meet I've never been there, I dont know where it is.

How about Dave and busters at 4:00pm on the 14 for a meeting spot. tristate isnt to far from there, off colreain(sp) ave, so a small drive away. they open the gates at 4:30, and racing starts at 5 -9 pm, last time i was there, that what they said. i have decided to hold of on the tires for now, and get a boost controller, and a test pipe, + there is still a little tread on the rsa's, so i might as well destroy them. i will probley bring 2 spare wheels, just in case. we need to figure out who wants to bring what, as far as refreshments.


Brian

i just realized the thread says, edgewater, when i really meant tri state. im a partially dumb^ss.


Brian

what kinda drinks are you thinking about? dave and busters sounds good to me, count me in. do eather one of you have an intake cam, you'll sell to me? i'm looking for a cheap upgrade. brain who did the swap in your car? i'm thinking about swaping in the sr20ve engine, but i'd like to take a ride in your car to make sure i don't want to go with boost instead. maybe we can get together after work sometime and i can take a look at your car. and it's tri-state we're going to on the 14, i didn't even realize that you put edgewater at the top. adam

I've got an intake cam I'll sell you. $70 Its still got the cam gear on it too. let me know if you want it. I know a bit about swaps too. we got mine up and running in all of 10 hours. Then the next weekend Ben Davis and I did a clutch on Brock Stepmans car in 1h 45min.

Chris Storer(mauibluegride) did the swap, and we took our sweet time at it. there was no sence in hurring, since we were waiting on an ecu to come from jwt. adam, your more than welcome to take her for a DRIVE, just let me know what day you want to meet after work. any day, tuesday-friday, let me know, i will drive her in(drive my beater(see sig) 95% of the time.

drinks: well i dont drink and drive, so i guess i can bring some pepsi/mountain dew.

Brian

check this out, a guy at the local muffler shop is making me a test pipe as i write this, and installing it for $30. my younger bro knows a few guys there, and they are hooking me up. 2 1/2 test pipe for 30 dollars. now, i need to order a boost controller.

Brian

mine is loud with the test pipe, of course I dont have turbo in the way. :(

i dont think mine got any loudered=(sp) it makes a difference.

Brian

brian, what kind of other goodies do you have on your 200, and did you drive it last friday? also how many miles did your last engine have on it, and who long have you had the DET in ? nick how many miles did your last sr20de have on it? and did all of you old parts hook right up to the new engine? i'm the only one here still runing the stock engine.. i hope the weather work out, my buddy wants to run his tiburon with us, since we put the 4-2-1 header on it, this past friday night. lets hope for the best. adam

my old sr20de had 67K on it before it died(low on oil, spun a bearing), and nearly everything bolts right up. other parts include an eibach prokit, clear corners and thats about it. i had 16" wheels, but sold them.

motor mods, 2 1/2 full exhaust, test pipe, and a boost controller.

Brian

brian, you should ask your friend chris to come with us to the track the 14. also what about the guy you called sandman? i went to chris's home page, he's going some serious shit to that car. do you have an bluebird engine in your's or the gti-r? brian if you anyone that has the nu-tech front bar for our car's im interested in buying one. also nick, how many miles did you old engine have it, because i'm thinking about buying your intake cam from you. i don't think it would be to worn out to put in my car, but i do want to get a boost in my hourse power from it. how can i get a hold of you to talk about it. if you want to email me your phone number you can send it to tripnissan@yahoo.com. also if you guy want to bring any friend with you, i'm for it. later.... adam

i invited a couple honda ricers.... i street raced a yellow civic 4dr from 60-100 saturday night on 75 on florence, and when i shifted to 4th at 100, he was about 3-4 cars behind. im nice, and we all stopped to talk, and it has a b16 swap in it,and he says it runs 14.8 on slicks...hahaha anyways, so i invited them up so the nissan community can spank them. i asked chris to come as well, but he is unsure if he will make it. sandman lives in louisville, so its a haul to come up for him. i think i have the only turbo se-r in this area:D but that will come to an end when chris builds his. i have the bluebird. my plans include a ttz maf, 50 injectors, a t28 or t3t04 turbo, s4 cams, and 3 inch exhaust, so my turbo set up might go up for sale this winter.


Brian

My old motor had 172,996 and died from low oil and a spun bearing too. You can get a hold of me at 304-1772 or I might stop by bob cat tomorrow after 2 or so if you'll be there. I can show it to you if you want. I had to modify my old oil seperator box. and the egr pipe wouldnt fit around the block so I did some "custom" work involving a hammer, hacksaw and wheel lug I'll have to show you.

yea nick i'll be hear at work all day, so you can stop by any time. so brian what is it you might be selling this winter, the bluebird engine, are you going to swap in a sr20de and put a turbo system on that engine. hey if the price is right, and if you could help me, i could be interested in your turbo set up. anyone of you heard that it i were get an jun lightened flywheel, i would cause the engine to vibrate i first gear? some member of barely legal racing told me not to put one in because that what happened to his saturn. but the guys out at sr20development told be they run those and have no problem with them. also brain would an jun flywheel for my motor work on an bluebird engine?brian i'll post back later to see if i can meet with you later in the week after work, if that cool with you. adam

adam, my bad, i wont be selling the motor, i might sell the turbo parts, topmount intercooler, trubo and manifold, ic piping, 370 injectors,dp and exhaust. everything someone would need to put a turbo on minus ecu. i dont know, it depends on the wife, if she lets me spend more money(over 4K invested so far, but bought alot of little things that didnt need, but did) my cell is 859 746 2859, and i get off at 530 everyday but mon and fri, mon is 8pm, friday is 330. my car is apart right now, have a oil seal on the tranny leaking, so i will try to fix it for the 3rd time. also my powersteering is leaking, so i will try to fix it as well. i will for sure be at tristate on the 14th.anyone have a pair of slicks laying around?

Brian

CORRECTION test n tune is on the 14th , but from 130-6pm. im still going to go, check www.tristatedragway.com

Brian