im doing a swap from a 94' 1.6L automatic and dropin in a sr20 5speed from a 91' SE-R.

here is my problem, i got the sr20, the tranny and the engine wire harness in hooked the battery up and not one thing worked. so i changed the under dash wire harness to and still not one thing moves flickers or turns on.

the rad. fans arent pluged up, a wire under the tranny isnt ether, and i broke a bolt for a wire on the back if the alternatior but i stuck it in a differant spot on the alternatior, and there is three wires i cant find a spot for: they all come out of the same spot and there part of the engine wiring harness that goes up to the steering column, they hang in front of the clutch pedal and one conector is small and blue, one is kind of big and its black, and one is the same size but clear.

please help me im ferustrated

now it cranks over but still no lights or cluster or anything else

check your fuses.. did you install the sr axles aswell.. hey good

yea i put those axles in and i just got it work finally, there where to wires that plug in to the back of the fuse block and when i did that everything came to life. i should be able to fire her up tomorrow. Finally i have sr20 power!!!