|
: NX1600 -> SR20DET motormounts..? Crim 09-01-2002, 09:25 PM I've read that to drop a SR20DET into the NX2000 you can just use the stock motor mounts... however I was curious about the NX1600... Do you have to have custom motor mounts fabricated? Or do the stock ones work? Thanks Pretty White 09-01-2002, 11:38 PM Originally posted by Crim I've read that to drop a SR20DET into the NX2000 you can just use the stock motor mounts... however I was curious about the NX1600... Do you have to have custom motor mounts fabricated? Or do the stock ones work? Thanks You will need the NX2000 crossmember. Other than that the motormounts will work. The chassis is the same so there is no modifications needed. ride154 09-03-2002, 05:58 AM pretty white can you explain what a crossmember is? I don't know what the technical dutch term is for it? I'm trying a det swap this winter! Pretty White 09-03-2002, 09:45 AM The long black bar that is holding the front dogbone mount and the rear engine mount. With the 4 bolts. Be careful with those crossmember bolts though cause they strip easy! ride154 09-03-2002, 09:56 AM ... be right if thats some sort of subframe for the engine? | ||